24v 100amp rectifier plating equipment with auto timer and ampere hour function, which exported to Portugal.
Plating rectifier parameters:
Input voltage | 220V/380/415V/460V AC ±10% 3 phase 4/5 line, 50-60Hz |
Rated output voltage | 5000A |
Rated output current | 5V/12V |
Output range | 0-100% |
Control Accuracy | ≤0.5% |
Power factor | ≥0.94 |
Efficiency | typical 90% at rated output |
Current ripple | <5% at rated output,low ripple in whole range |
Control mode | constant current/constant voltage |
Cooling | Air cooling or water cooling |
Protection class | IP32 for Air cooling,IP44 for Water cooling |
Insulation grade | B |
HMI | Touch Panel on control box |
Remote control interface | Standard RS485, Profibus, Profinet, 0-10V/4-20mA available |
Alarm type | Audible and visual alarm |
Protections | Output overcurrent protection |
Over heat protection | |
IGBT Driving protection | |
Features | Digital DSP control(USA TI DSP Chip) |
History date record function | |
Waveform function | |
History protection record function | |
Waveform function | |
History protection record function | |
Ambient temp | Max. 40℃, derated operation up to 50℃ |
Altitude | ≤2000m altitude. De-rated operation if higher |
Clients’ feedback:
Welcome your inquiry:
wechat:13669532124
Tel/whatsapp:18390828699