Teflon heating tube is a new type of electric heater that is resistant to strong corrosion and is used for heating various corrosive liquids. It has excellent aging resistance and good flexural properties, and is designed with low surface load (1.5w/cm2). The joint adopts fully enclosed acid and alkali proof, non-heating section and overheating safety protection system are completely customized according to customer's needs. Perfectly guaranteed that the heater is not easy to burn, long service life, fully sealed, non-corrosive, no leakage, with grounding protection, safe and reliable, suitable temperature below 110 °C, heating in a very thick liquid, must be configured with stirring. It is a reasonable corrosion-resistant heater selection for corrosive liquid phase heating, condensation, evaporation, concentration, etc. of electroplating, electrolysis, degreasing, pickling, electroless nickel plating, anodizing, aluminum pouring, smelting, chemical, pharmaceutical, food, etc. !
Teflon heating tube points to note:
1. To prevent the heated liquid from being too viscous, the solid substance sticks to the surface of the tube and burns the Teflon.
2. It is recommended to increase the temperature control protector to prevent the temperature from exceeding 110 degrees and burn out the tube.
3. The joint part should not be dismantled to prevent acid penetration.
4. The power requirement can be controlled below 1.5w/cm2. Do not exceed 2W/cm2.