ac dc 60v 1000amp hard anodizing rectifier with touch screen
Aluminum anodizing DC rectifier used in anodic oxidation of aluminum, this technical process is actually a process by mean of electrolytic aluminum surface to make aluminum profile or aluminum alloy profile forming alumina oxidization film. Our rectifiers also have imitation gold electroplating power supply, pulse electroplating rectifiers, high-frequency electro plating power supply, DC voltage stabilization power supply, battery charging power supply, DC motor test power supply, experimental measurement power supply, pulse superposition hard oxidation DC rectifier, special usage silicon AC to DC rectifier, electric furnace heating power supply, high power (electrolysis, oxidation) power supply and some matched power supply equipment etc..
*Module structure support direct parallel, current expanding
*Touch panel for display, operation
*Profibus, Profinet, Modbus, 4-20mA, 0-10V for remote control
*Fault auto diagnose and alarm
*Timer setting, auto OFF
*Process Step Setting, auto running
*Soft Start & Stop, time setting
*Save last time output setting,such as keeping 12V while starting
*Cabinet seal for water cooling version, avoid corrosion
All standard configurations are 50 or 60Hz.
Aluminum anodizing DC rectifier features:
Aluminum anodizing DC rectifier technical parameters:
Input voltage: three-phase four wire 380V, 415V, 50-60Hz;
DC output current: 100A-30000A can be optional;
Output DC voltage: 3V-1000V arbitrary choice;
Voltage stabilization accuracy: less than or equal to 1%;
Current stabilizing precision: less than or equal to 1%;
The output ripple current: 1%-2%;
Cooling method: forced air cooling or water cooling;
The cooling water quality: ordinary tap water, deionized water (recommended); PH value: 7-8, Water pressure: 0.1-0.25MP, Temperature: 3 degrees -33 degrees;
Load operation: full load run for 24 hours, more than 1000 meters above sea level, reducing the use of capacity;
Working environment: the environment temperature is 10 degrees below zero to 40 degrees; at room temperature (15-25 degrees) of air relative humidity should be less than 90%.