Haney CE standard 18V 1000A hot sell model aluminum anodizing rectifier
As for the anodizing,the output volt will be higher than the other electoplating,it must be more than > or =18v dc.
Anodizing is an electrochemical process that improves the corrosion and wear resistance of aluminum by the formation of a layer of oxide on its surface. This process is accomplished by immersing aluminum into an electrolyte for a period of time. The anodized aluminum can be dyed into various colors.
Haney Industrial Rectifiers ensure years of maintenance-free operation and a long operating lifetime with the most comprehensive warranty in the industry.
Industrial rectifier is a high technological device that converts AC (alternating current) to DC (direct current). The electrical process is well known as rectification. These devices are commonly used as a part of power supplies. There are various uses of rectifiers, such as galvanizing, electroplating, The rectifier solutions we offer come with the thyristor technology and a switch mode.
Various surface finishing processes such as sandblasting, mechanical and chemical polishing can be added to the process to modify the appearance of the anodized aluminum. The anodized aluminum an also be dyed to desired colors
Q: Is your plating rectifier with IGBT or SCR system?
A: It is with IGBT system,which is more energy saving and lighter then SCR system.
Q: What's the lead time for the plating rectifier?
A: We have stock for the normal items, the delivery time is 2-4 days for OEM parameter.
Q: What is the output frequency and duty cycle? Does the frequency and duty cycle fixed or adjustable?
A: The out frequency is 18-20khz that can't be adjustable, duty cycle is 75% adjustable.
Q: Could you make the parameters per to clients’ request?
A: 0-300V,0-30000amp adjustable is workable for us.
Q: What other products related to chrome electroplating (apart the rectifier) could you offer to me to buy together with the rectifier?
A: Rectifier,filter,tank,titanium exchanger and titanium heaters will be needed for chrome plating,temperature control box,industrial chiller,pump are optional.
Haney Electroplating switching power supply is a high frequency switching power supply designed according to electroplating production process, and its output waveform is high frequency square wave pulse.
Electroplating industry using Haney series electroplating switching power supply can make the coating crystallization more meticulous and bright.
Electronic Controlled New Generation Anodizing and Plating Rectifier
Each Phase Automatically Controlled and setted ramps
Thyristor Technology or IGBT Technology with 1 Millisecond Response Time
Micro Chip Controlled, Fast and Precisely
No effect on the Load, perfect as Voltage Current Supply
High Input Power Factor (>0.9)
High Efficiency up to 90%
Optional Dual Input Possibility
Wide Input Voltage Range
Advanced Protection and Data Logging
Short Circuit and Overload Protection
Unlimited Number of Paralleled Modules
Selectable Output Voltage Values
Made in Europe User Internal Materials
Easy to Use and Control the Anodizing and Plating Rectifier via External Screen
Small Footprint and Easy Maintenance
Advanced Communication Capabilities
Perfect For Industrial Areas
Customisable with Switch mode or Paralleling option