Haney 5000a 24v copper electrowinning IGBT High frequency adjustable dc power supply
IGBT module is a modular semiconductor product which is encapsulated by IGBT( insulated gate bipolar transistor chip) and FWD( continuous current diode chip) through a specific circuit bridge. The encapsulated IGBT module is directly applied to frequency converter, UPS uninterruptible power supply and other equipment;
The IGBT module has the characteristics of energy saving, convenient installation and maintenance, stable heat dissipation and so on; most of the modular products sold in the current market are IGBT modules;
IGBT is the core device of energy transformation and transmission, commonly known as the "CPU", of power electronic devices" as a national strategic emerging industry, it is widely used in rail transit, smart grid, aerospace, electric vehicles and new energy equipment.
Input voltage : Three-phase( four-wire) 380V,415V,440V,480V AC 50-60HZ
Output DC current 24v 5000a
Input Voltage:220v/380v/400v/418v/480v AC
Output DC voltage 6V,12V,15V,18V,24V,36V Arbitrary choice
Voltage stability ≤1%
Current stability ≤1%
Control Type:Remote control
Package Type:Wooden case
Cooling Mode Forced air cooled or water cooling.
Workload Full capacity operation, more than 1,000 meters above sea level, reduced load operation
Working condition Ambient Temperature range -10 ℃ ~ 40 ℃,Less than 90% humidity(when ambient temperature is 20℃±5℃).
Why I recommend switch mode power supply, please reference below points:
1. Lower cost
2. High conversion efficiency, power saving
3. long time 7 days 24 hours continuous running
4. Compact size, modular structure, less size
5. Low pollution to grid, power factor>0.94
6. Not affected by power fluctuation, 100% output, don't need extra capacity
Q: What are the output frequency and duty cycle? Does the frequency and duty cycle fixed or adjustable?
A: The out frequency is 18-20khz which can't be adjustable, the duty cycle is 75% adjustable.
Q: If I plan to build a new plating factory, what do I need to do?
A: It would be better if you can communicate with your technician for the process details, and see what items needed than make a purchasing plan. We can be helpful if you need any suggestions from us.
Q: Do you offer 100 Amp units that would run on a standard North American 115 Volt input plug? Right now we are trying to complete a proof of concept electro-synthesis in good yield before our investors sign on, and a table-top size (so to speak) setup is what we are aiming for currently.
A: We could make the plating rectifier as your request, any OEM parameters will be workable from our factory.
Q: What is the sound level of the air-cooled rectifier.
A: It is a low grade.
Q: Do you have contacts in regards to advancements in the electroplating galvanized industry or zinc metal protection?
A: We are professional in making them, galvanized electroplating industry be needed electroplating rectifier, titanium basket, filter and industry chiller, all of them are workable for us.
Q: Do you have electrowinning machinery for copper wire?
A: Our machine is ac to dc power supply,100% be suitable in electrowinning.